Quantity:

Salt wall system

This modular salt wall construction kit is designed as a hanging system for the simple, quick and clean construction of a salt wall. The salt bricks are made from pure, translucent rock salt. They are simply hung in a grid on the wall.

Red salt

The colour scale ranges from pink to orange to dark red. There are stones with a single colour and those with several different shades, as well as with beautiful marble-like structures, with crystal salt and clay inclusions. Incidentally, red salt gets its colour from tiny amounts of iron oxide.

Origin: Red salt comes from the Salt Range in Pakistan.

Dimensions

The salt wall system is available in various sizes. The module width is 50 cm. Therefore, the width can be selected in 50 cm increments. The height can be selected in 20 cm increments, starting from 40 cm. Each salt wall consists of two different salt bricks: the main brick (20x10x5 centimetres) and the edge brick, which is only half the size (10x10x5 centimetres). As its name suggests, the edge brick is only used at the edge. If you want to extend your salt wall to the side, the kerbstones are replaced by main stones and the kerbstones are moved to the newly created edge. The joint between the stones is approximately 2.4 millimetres wide. This results in slightly larger overall dimensions in width and height. The bricks are hung in a bond, as with real brickwork. The four edges of the visible side of each brick are bevelled with a five millimetre wide 45-degree chamfer.

Assembly

For each salt wall module, four to six brackets are screwed to the wall, to which a support grid is attached. There are two angled holes in each of the salt bricks into which grub screws are screwed, which are then used to hang the bricks into the grid. All metal parts are made of rust- and acid-free stainless steel. Translucent foam strips made of oekotex-certified foam are clamped between the bricks to fill the joints. This looks beautiful, especially when the salt wall is backlit, as there are no distracting shadows. The joints now glow together with the salt stones in a warm shade of light. In addition, unpleasant flashes of light, which occur when looking directly through a joint into a light source, are avoided.
The salt wall kit is designed as a hanging system and can therefore be placed freely on the wall like a picture; there is no need for a plinth or to raise the salt stones from the floor. As no adhesive is required, there are also no emissions.
The salt wall can be easily dismantled and reassembled at another location. However, the threaded pins should then be left in the salt bricks so that the salt does not break out due to repeated screwing in and out.

Detailed assembly instructions are supplied. Please watch one of our assembly videos!

Tools required

Spirit level and pencil
Impact drill with 6 mm and 8 mm drill bits
Cordless screwdriver with 2.5 mm and 5 mm hexagon socket bit

Note

Rock salt dissolves at a relative humidity of 75 per cent or more. Rooms with higher humidity are therefore unsuitable for a salt wall, unless the humidity is lowered accordingly with a dehumidifier.

Yes, our salt panels are generally also suitable for installation on plasterboard or drywall. Thanks to their shallow depth of just 9 cm and a low load-bearing depth of approx. 4.5 cm, they exert virtually no leverage on the wall.

A module measuring 50 × 100 cm weighs around 60 kg and is secured with six screws – this equates to a load of around 10 kg per screw.

It is important to take the total weight of the entire salt wall into account during the planning stage. For larger salt walls, we recommend aligning the vertical substructure so that it directly accommodates the salt wall’s fixing points. We will be happy to provide you with the required dimensions in advance.

For installation on plasterboard walls, suitable universal wall plugs or special plasterboard wall plugs should be used. The expansion plugs supplied are intended for solid brick and concrete walls.

salt wall kit

Salt wall kit basic red 100 x 200 cm

Salt wall kit basic red 100 x 200 cm

Salt wall system

Red salt

Dimensions

Assembly

Tools required

Note

Can I install the salt wall basic kit in my sauna?

I’d like to illuminate the salt wall using different colours or a colour-changing effect. Which salt wall is suitable for this?

Can the salt wall be fitted to a plasterboard wall?

Contact

PAYMENT METHODS