Quantity:

Salt wall system

This modular salt wall construction kit is designed as a hanging system for the simple, quick and clean construction of a salt wall. The salt bricks are made from pure, translucent rock salt. They are simply hung in a grid on the wall.

Light, warmth and salt

Light, warmth and salt are important components of life; they promote harmony, joy and well-being. Warm light gently penetrates the red salt crystal and creates a golden-orange salt light, similar to the sunrise. The warmth radiates through the salt wall and the salt stones absorb it over time and release it into the room as natural radiant heat, even when the light has already been switched off. Each stone in the salt wall is a piece of nature and unique in its structure and colour. The crystalline secrets that have been enclosed within it since time immemorial are now revealed by the even and warm backlighting with the SALUX® lighting system. The red salt stones in their various shades of colour are combined in our salt wall system to create a total work of art and - together with the backlighting - form a salt surface that shines in golden salt light.

Red salt

The colour scale ranges from pink to orange to dark red. There are stones with a single colour and those with several different shades, as well as with beautiful marble-like structures, with crystal salt and clay inclusions. Incidentally, red salt gets its colour from tiny amounts of iron oxide.

Origin: Red salt comes from the Salt Range in Pakistan.

Dimensions

The salt wall system is available in various sizes. The module width is 50 cm. Therefore, the width can be selected in 50 cm increments. The height can be selected in 20 cm increments, starting from 40 cm. Each salt wall consists of two different salt bricks: the main brick (20x10x5 centimetres) and the edge brick, which is only half the size (10x10x5 centimetres). As its name suggests, the edge brick is only used at the edge. If you want to extend your salt wall to the side, the kerbstones are replaced by main stones and the kerbstones are moved to the newly created edge. The joint between the stones is approximately 2.4 millimetres wide. This results in slightly larger overall dimensions in width and height. The bricks are hung in a bond, as with real brickwork. The four edges of the visible side of each brick are bevelled with a five millimetre wide 45-degree chamfer.

Backlighting

The centerpiece of the backlighting is a rope light mounted on the back panel, fitted with miniature light bulbs. Their light bathes the salt wall evenly in a harmonious hue, and its pleasant warmth is immediately noticeable because the rock salt transmits the vast majority of heat radiation—92 percent, to be precise. Over time, the salt bricks and the salt wall also warm up, and even after the light is switched off, this warmth continues to radiate for quite some time. It is this light-heat effect that creates this unique and comfortable atmosphere.

Replaceable Backlighting
The rope light can be replaced as needed—and this is the sensational part—without having to remove all the salt bricks and the supporting grid. You only need to remove one brick to access the electrical connection via the junction box underneath. Then the rope light can simply be pulled out sideways from the salt wall. In the same way, a new rope light is inserted piece by piece laterally behind the salt bricks into the corresponding light channels and then connected accordingly. This new backlighting system is highly recommended, especially for salt walls with long operating times. The salt bricks do not need to be stored separately, the retaining grids do not need to be removed, and the holders do not need to be loosened – a huge advantage over the previous backlighting system. However, a prerequisite is that there is about 15 cm of space to the right and left of the salt wall.

Back plate

The back plate also serves as a drilling template, making it easy to assemble the salt wall. The back plate features light channels into which the rope light is inserted and a through-hole for the power connection. The salt wall requires a 230-volt power connection. See our planning guide for the exact dimensions.

Assembly

For each salt wall module, four to six brackets are screwed to the wall, to which a support grid is attached. There are two angled holes in each of the salt bricks into which grub screws are screwed, which are then used to hang the bricks into the grid. All metal parts are made of rust- and acid-free stainless steel. Translucent foam strips made of oekotex-certified foam are clamped between the bricks to fill the joints. This looks beautiful, especially when the salt wall is backlit, as there are no distracting shadows. The joints now glow together with the salt stones in a warm shade of light. In addition, unpleasant flashes of light, which occur when looking directly through a joint into a light source, are avoided.
The salt wall kit is designed as a hanging system and can therefore be placed freely on the wall like a picture; there is no need for a plinth or to raise the salt stones from the floor. As no adhesive is required, there are also no emissions.
The salt wall can be easily dismantled and reassembled at another location. However, the threaded pins should then be left in the salt bricks so that the salt does not break out due to repeated screwing in and out.

Detailed assembly instructions are supplied. Please watch one of our assembly videos!

Tools required

Spirit level and pencil
Impact drill with 6 mm and 8 mm drill bits
Cordless screwdriver with 2.5 mm and 5 mm hexagon socket bit

Technical data

Product dimensions: 304,1 cm width x 245,6 cm height x 9,1 cm depth
Operating voltage: 230 V
Light source: SALUX® rope light
Total output: 1116 Watt
WEEE-Reg.-Nr. DE69841523

Note

Rock salt dissolves at a relative humidity of 75 per cent or more. Rooms with higher humidity are therefore unsuitable for a salt wall, unless the humidity is lowered accordingly with a dehumidifier.

salt wall kit

Salt wall kit complete white 300 x 240 cm